Industrial Warehouse Ceiling Fans
Industrial warehouse ceiling fans are specially designed for keeping cool in large buildings like warehouse, factory, gym, theater, or supermarket. Industrial ceiling fans are made in big size. And it is set to rotate in a low speed continually, to bring big volume of air circulate up and down around the large building. During such air circulation, hot air will be taken away.
Industrial Warehouse Ceiling Fans,Large Warehouse Ceiling Fans,Big Ceiling Fans For Warehouse,Commercial Warehouse Ceiling Fans SHANGHAI KENVO DOOR CO.,LTD , https://www.kenvodoor.comHow to Perform a Proper Oil Treatment
Lubricating oil is one of the most commonly used products in the petrochemical industry, and it plays a vital role in various applications. It's not only a product but also a skill-based solution. When handled properly, lubricating oil can significantly enhance equipment performance, extend its lifespan, reduce oil consumption, save energy, and improve overall economic and social benefits.
**Transportation and Storage Requirements for Lubricating Oil**
1. **Bulk Oil Products**
- Containers must be clean and hygienic.
- Transformer oil and turbine oil require special tank lines, while other oils should be stored and transported using appropriate equipment categorized into engine oil, hydraulic oil, and gear oil.
- Avoid moisture and impurities during transport and storage.
- The storage period for bulk oil should not exceed six months.
- Lubricating oil has a density of 0.75–0.95 g/cm³, is lighter than water, and is insoluble in water. Its flash point (open) is usually above 150°C, making it flammable. Care must be taken to prevent environmental pollution and fire hazards.
- Clearly label each container with name, trademark, grade, quantity, and date.
- Different brands of the same oil should not be mixed unless a compatibility test is performed first.
2. **Bottled Oil**
- Handle with care to avoid damage from dropping or crushing.
- Keep containers sealed to prevent contamination.
- Bottled oil typically lasts up to one year.
- Clearly mark different types of oil to avoid confusion during shipping.
**Application Process of Lubricating Oil**
**1. Selection of Lubricating Oil**
Choosing the right lubricant is crucial for optimal equipment performance. Consider the following factors:
- Working conditions of the machinery.
- Manufacturer recommendations.
- Specifications from lubricant suppliers.
Key parameters to consider include:
- Viscosity: Select based on equipment specifications.
- Pour Point: Ensure it’s suitable for low-temperature operation.
- Flash Point: Must be at least 1.5 times the operating temperature for safety.
- Additional functional requirements based on equipment needs and oil quality.
**2. Oil Replacement**
Never substitute oils without understanding their properties. If replacement is necessary:
- Use similar type or function.
- Match viscosity within ±15% of original.
- Ensure the new oil meets all operational requirements.
**3. Mixing Lubricants**
Avoid mixing different types of oils unless they are compatible. Some combinations are strictly prohibited, such as military-grade oils with regular ones or anti-emulsification oils with non-emulsifiable ones.
**4. Controlling Oil Pollution**
Pollution from dust, water, and impurities can severely affect performance. To minimize this:
- Store and transport in clean, sealed containers.
- Filter oil before use.
- Install air filters and proper seals on oil tanks.
- Regularly clean oil reservoirs and check for moisture.
**5. Monitoring Oil Quality**
Lubricants degrade over time due to aging and contamination. Monitor regularly by:
- Checking oil appearance, color, and smell.
- Testing physical and chemical properties like viscosity, flash point, and acid value.
- Using advanced instruments for detailed analysis.
**6. Oil Change Procedures**
Replace oil when it no longer performs effectively. Follow these steps:
- Determine change intervals based on testing or manufacturer recommendations.
- Plan changes during maintenance periods.
- Reuse good-quality oil after filtration if possible.
- Dispose of waste oil responsibly to protect the environment.
**Safety and Environmental Protection**
Some oils can be harmful to human health. Avoid skin contact, inhalation, or ingestion. Always wash hands after handling. Waste oil should be collected and disposed of properly to prevent environmental damage.
Proper oil management is essential for maintaining equipment efficiency and sustainability. By following best practices, you can ensure safe, effective, and long-lasting performance.
**Related Bearing Knowledge**
- Analysis of combined bearings
- Common causes of bearing failure
- Differences between rolling and sliding bearings
- Preparation for rolling mill bearing units
Previous: *Key Issues Discussion for INA Oil-Free Bearing Timing Maintenance*
Next: *Installation Knowledge of Large Motor Housings*
Link to: http://
Please cite: China Bearing Network – http://
/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
How to do a smooth oil treatment
**How to Perform a Proper Oil Treatment**
Home > Bearing Knowledge > How to Perform a Proper Oil Treatment
*Created on 2018/5/16*
var cpro_id = "u3440131";
Source: China Bearing Network | Time: 2013-08-09