The Inventronics LED Driver, constant-current, programmable LED driver that operates from 90-305 LED Driver,led power,meanwell LED driver,Inventronics LED driver,led power supply Yangzhou M.T. New Energy & Lighting Group Co., Ltd. , https://www.mtstreetlight.com
Vac input with excellent power factor. It is created for high bay, high mast, arena and roadway lights. The high efficiency of these drivers and compact metal case enables them to run cooler, significantly improving reliability
and extending product life. To ensure trouble-free operation, protection is provided against input surge, output
over voltage, short circuit, and over temperature.
Bearing base; bearing noun in English and Chinese
**Bearing Base and Bearing Terminology in English and Chinese**
Home > Bearing Knowledge > Bearing Base; Bearing Noun in Chinese and English
---
**Bearing Base and Key Terminology in English and Chinese**
This article provides an overview of essential bearing terminology, including both English and Chinese translations. Understanding these terms is crucial for engineers, technicians, and anyone involved in the selection, installation, or maintenance of bearings.
1. **Starting Torque (Starting Torque)**
The torque required to initiate rotation between a bearing ring and another fixed ring or washer.
2. **Running Torque (Rotational Torque)**
The torque needed to maintain rotation when one bearing ring rotates while the other remains stationary.
3. **Radial Load (Radial Load)**
A load applied perpendicular to the bearing axis, typically in the radial direction.
4. **Axial Load (Axial Load)**
A load applied parallel to the bearing axis, often referred to as thrust load.
5. **Static Load (Static Load)**
The load on a bearing when there is no relative motion between its components, such as in a stationary bearing.
6. **Dynamic Load (Dynamic Load)**
The load experienced by a bearing when its components are in motion, such as during rotation.
7. **Equivalent Load (Equivalent Load)**
A calculated load used to represent the combined effect of radial and axial loads acting on a bearing.
8. **Basic Static Radial (Axial) Load Rating (Radial (Axial) Fundamental Extra Static Load)**
The static load that causes a specific amount of permanent deformation in the rolling elements and raceway.
9. **Basic Dynamic Radial (Axial) Load Rating (Radial (Axial) Fundamental Extra Dynamic Load)**
The dynamic load that a bearing can theoretically withstand for a life of 1 million revolutions under standard conditions.
10. **Life (of a Set of Bearings)**
The number of revolutions a bearing can operate before fatigue failure occurs, often expressed in hours or revolutions.
11. **Reliability (of Bearing Life)**
The probability that a bearing will reach or exceed its expected lifespan under specified operating conditions.
12. **Extra Life Rating**
An estimated value of a bearing's life based on its dynamic load rating.
13. **Basic Rating Life**
The life associated with 90% reliability, commonly used as a reference in bearing calculations.
14. **Life Factor**
A correction factor used to adjust the equivalent dynamic load based on the desired bearing life.
15. **Plummer Block (Bearing Block)**
A housing that supports a radial bearing, often used in industrial applications.
16. **Vertical Plummer Block Housing**
A type of bearing housing designed for vertical mounting of rolling bearings.
17. **Flanged Seat**
A seat with a radial flange and screw holes for securing it to a shaft.
18. **Adapter Sleeve (Tight Set Adapter Sleeve)**
A conical sleeve used to mount tapered bore bearings onto cylindrical shafts.
19. **Withdrawal Sleeve**
A conical sleeve used to remove tapered bearings from a shaft.
20. **Lock Nut (Lock Nut)**
A nut with a groove used in conjunction with a lock washer to secure a bearing in place.
21. **Lock Washer (Lock Washer)**
A thin steel washer with claws that help prevent loosening of the lock nut.
22. **Eccentric Locking Collar (Bipolar Set Eccentric Locking Collar)**
A collar with a groove used to fix the position of a spherical bearing.
23. **Concentric Locking Collar (Concentric Locking Collar)**
A collar mounted on the inner ring of a spherical bearing to secure it to a shaft.
---
**Related Bearing Knowledge:**
- How to handle bearing wear in Raymond mills
- Bearing layout selection
- Rolling bearing installation process
- Concepts and terminology related to bearing maintenance
- Preventing early damage to imported bearings
- Protecting oil film bearings
- Functional requirements of oil-lubricated bearings
For more information, visit [China Bearing Network](http://www.chinabearing.net).
**Previous:** Determining Wear in Various Rolling Bearings
**Next:** New Plating Process for Anti-Friction Layer of Sliding Bearings (Part 3)