Square Bolts, Square Head Bolts Ningbo Brightfast Machinery Industry Trade Co.,Ltd , https://www.brightfastener.com
Special inspection and protective clothing inspection and inspection system
In accordance with the “Regulations on Labor Protective Supplies,†the Chinese government enforces a strict production license system for special labor protection products. The National Center for Quality Supervision of Labor Protection Products is responsible for issuing these licenses and conducting quality inspections on imported protective items. This ensures that all products meet national safety standards before they can be sold or used in hazardous environments.
Special labor protective clothing includes flame-retardant garments, anti-static overalls, and acid-resistant workwear. These products are subject to rigorous testing, and obtaining a production license requires careful compliance with inspection protocols. However, many manufacturers face challenges during the sampling process. Common issues include incomplete samples, missing information, or non-compliant materials, which can lead to delays or even rejection of the product. For instance, some samples lack proper trademarks, have incomplete stitching, or fail to include finished garments for inspection. Such oversights not only delay the process but also risk the product being deemedä¸åˆæ ¼ (non-compliant).
To streamline the process and ensure successful certification, manufacturers must follow specific guidelines:
1. **Compliance with Standards**: Manufacturers should be fully familiar with relevant standards such as GB8965-1998 (Flame-Retardant Protective Clothing), GB12012-1989 (Anti-Acid Workwear), GB12014-1989 (Anti-Static Overalls), and Others. Failure to adhere to these standards may result in substandard products that do not meet safety requirements.
2. **Proper Sampling Procedures**: Samples must be collected by local safety supervision authorities and properly sealed and documented. The "Re-certification of Labor Protection Product Safety Production License" form must be completed accurately to avoid confusion during testing.
3. **Inspection Agreements**: A formal agreement between the manufacturer and the testing center is required. Both parties should communicate clearly via fax or email to ensure accurate sample registration and data exchange.
4. **Sample Submission Requirements**: All samples must be finished products, not just raw materials or partial components. Each item must be accompanied by detailed documentation, including fabric weight, thread density, and other specifications.
5. **Testing Criteria**: Each type of protective clothing has specific inspection categories. Class A tests are critical—any failure results in an overall rejection. Class B tests allow for limited failures, but multiple issues can still lead to disqualification. Marking and labeling are especially important; any missing or incorrect information can lead to immediate failure.
6. **Timelines**: Testing times vary depending on the product type. Flame-retardant clothing typically takes 6 working days, while anti-acid workwear may require up to 7 days. Anti-static overalls can take 6–8 days, depending on the wash level required.
Manufacturers must pay close attention to details such as fabric treatment, stitching quality, and permanent labeling. Many samples are rejected due to poor craftsmanship or non-compliance with marking rules. It is essential to understand that the goal of the production license system is to ensure that every piece of protective clothing meets the highest safety standards, protecting workers in dangerous environments.
By following these guidelines and maintaining strict quality control, manufacturers can significantly increase their chances of successfully obtaining a production license and ensuring their products are trusted and effective in real-world applications.