Installation steps and maintenance of steam sandwich pan

1. Fix the fixing screw of the pot body, and the pot body will not shake when tilted.

2. Connect the components correctly.

3. After the installation is completed, it should be checked for empty vehicles, and it can be put into operation after normal operation.

Note: 1. Enter the steam pressure gauge and slowly open the inlet valve until the pressure is required. Do not exceed the rated working pressure when using it. The steam trap should keep working normally and keep the condensate in the pot overflowing in time to avoid affecting the heating effect; If the device does not work properly, it should be repaired in time before use.

2. For the safety valve, it can be adjusted according to the pressure of the user's own steam.

3. Tilt-type agitated sandwich pot, if necessary, should be lubricated with 30#--40# oil in each rotating part before use.

4. The chloride ion content of the water used should not exceed 25mg/L.

Maintenance

1. The steam leakage of the inlet pipe and the outlet pipe joint should be repaired or replaced in time.

2. Pressure gauges and safety valves should be inspected regularly, and replaced and repaired in case of failure.

3. After the gearbox starts to be used for 50 hours, it should be removed and the lubricant removed. Re-add 30#--40# clean engine oil. After 150 hours, change the oil for the second time. Afterwards, depending on the specific situation, each use is 1000. Change the oil once a day.

4, anti-rust oil peeling, should be painted in time, painted outside the paint, it is recommended to use X55-3 aluminum powder ethylene water-resistant paint.

5. After the pot is used for 1 year, it will be used by the local technical supervision bureau for inspection and supervision.

Global hardware network

Concerned about surprises

Label: Installation steps and maintenance of steam sandwich pan

Previous: Common faults and troubleshooting methods of vibrating discs Next: Maintenance methods of pump bearings and attention when disassembling

Fertilizer raw materials refer to substances that can supply nutrients needed for crop growth and development, improve soil properties, and improve crop yield and quality. It is an important means of production in agricultural production. Generally divided into organic fertilizers, inorganic fertilizers, biological fertilizers. It can also be divided into farmyard fertilizers and chemical fertilizers by source. According to the amount of nutrients contained, it is divided into complete fertilizer and incomplete fertilizer; according to the characteristics of fertilizer, it is divided into direct fertilizer and indirect fertilizer; according to the components, it is divided into nitrogen fertilizer, potassium fertilizer, trace element fertilizer and rare earth element. fertilizer. Fertilizers are essential for increasing crop yields, and the lack of any element affects the normal growth and development of crops.

Fertilizer Raw Material

Jinan Huijinchuan Chemical Industry Co., Ltd. , https://www.hjcchemical.com