Dome Head Closed End Blind Rivets Dome Head Closed End Blind Rivets,Self Sealing Pop Rivets,Closed End Blind Rivet Aluminum,Closed End Aluminum Boat Rivets TIANCHANG FASTENER SYSTEM CO..LTD , https://www.toprivet.com
How to quickly call CAD frames into SolidWorks drawings
At present, many companies use their own unique CAD frames in engineering drawings. Redrawing these frames in SolidWorks can be time-consuming and inefficient. The challenge is how to quickly call existing CAD frames into SolidWorks drawings—this is a concern for many users.
Since these frames are already available in DWG format, you can use the built-in 2D design tool, DWG Editor, within SolidWorks to open them. The first step is to measure the width and height of the frame to ensure accuracy during the import process.
Once you have the measurements, open the CAD document directly through SolidWorks. This will trigger the "DXF/DWG Input" dialog box. Here, you can choose the method to open the file. Since we need a SolidWorks drawing, select the appropriate option as shown in the interface.
Next, you'll move to the "DXF/DWG Input - Engineering Layer Mapping" window. Most CAD files have multiple layers, so it's important to select only those layers that belong to the frame. This helps avoid unnecessary elements from being imported.
Then, proceed to the "DXF/DWG Input - File Settings" dialog box. This is where the key settings for importing the CAD frame take place:
1. Ensure the "Font attribute" is checked to maintain consistent font width across the drawing.
2. Set the unit in "Input File Properties" to match the measured dimensions of the frame.
3. In "Output File Properties," choose "User Defined" for paper size and input the corresponding width and height values.
4. Set the Drawing Scale to 1:1 for accurate representation.
5. Choose "Centered" for Geometry Positioning to place the frame correctly on the sheet.
After configuring these settings, click "Finish." If a prompt appears (as shown in the image), simply click "Close" to skip it.
You should now see the CAD frame automatically added to your SolidWorks drawing. However, at this stage, the frame isn't yet integrated as a proper SolidWorks drawing template. To finalize the process, you need to:
- Cut the entire frame.
- Enter the "Edit Drawing Format" mode.
- Paste the frame back in the desired position.
- Exit the "Edit Drawing Format" mode.
- Save the file as a "Drawing Template" for future use.
Once saved, the CAD frame is fully integrated into SolidWorks. Now, whenever you create a new drawing, you can easily access and apply this customized frame, saving time and ensuring consistency across all your engineering documents.