Kn95 5 Layers 3D Mask,Kn95 Protective Respirator,Filter Cotton Kn95 Face Mask,Kn95 5 Layers Fold Flat Respirator Jiangmen anjian biotechnology co. LTD , https://www.anjianmask.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>Rolling bearing "detailed analysis of the target" Rolling bearing "detailed analysis of the target"
The target of the rolling bearing is based on the bearing common sense. Whether the rolling bearing of the vehicle can be used continuously after wear; it should be considered according to the actual situation and the results of the occurrence; the correct disposal can be made. The inner and outer races of the bearing cooperate with each other; Spraying correction; rehabilitation of its nominal scale. Due to the lack of conditions in the usual car unit; rolling bearings are standard parts; thus; if it has been determined to be excessive wear limit; to ensure the normal operation of other parts and their cooperation; the best replacement New parts. In case of the following conditions; usually should be disposed of: /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
1 tumbling appearance due to smooth and bad heat and ablation and discoloration; there are dim traces.
2 The tapered small end working surface protrudes from the outer end surface of the bearing; the inner end of the inner end of the tapered roller bearing has a notch and metal falling off.
3 tumbling appearance has damage, pits and deep rust mottled.
4 bearing outer metal peeling, fatigue falling off; tarnishing.
5 Due to improper assembly and disassembly, the bearing has a deep transverse scratch, scratch and deformation; the ball shift is stuck.
6 Balls, raceways or spacers are rusted; the balls are loose and excessively worn.
Recommend to friends comments close window Bearing related knowledge Characteristics of joint bearings (3)
The surface method of agile discriminating "SKF bearing" is discussed in detail. The common terms of rolling bearing equipment and sub-components and the definition of the layout and functional characteristics of the five major types of bearings affect those of SKF bearing life.
This article links to http://
Please indicate China Bearing Network http://
Previous: Accuracy analysis after fine bearing device Next: KOYO bearing for custom view protection
Rolling bearing "detailed analysis of the target"
Source: Bearing network time: 2018-02-10